We manufacture and
supply various pultrusion dies for rods,
tubes, beams and shapes. Our equipment&tooling factory has full range
of machinery&tooling including precision
machine tool, line-cutting machine, hammering
machine, lathe, planer, grinder, polisher,
borer, special
system for gun-grilled die, etc. Combining
excellent equipment, strong R&D team,
experienced workers, we always try to offer
quality, fast delivery, competitive price,
perfect service
Exclusive Advantages:
1. Outstanding staff and workers.
2. Competitive Price: Obtainable by our
high-efficiency and reasonable control of
the cost.
3. Designing and manufacturing by machinery
designers and process/technique specialists
jointly.
4. Special start-up services: Most of our
staff have been studying in pultrusion process
for a long time. so we can offer special
help for those who are in pultrusion for
the first time.
5. Quick action in response to any inquiry,
custom design and manufacture, delivery.
6. Perfect services: for each order we'll
study carefully in all aspects and try our
best to save customer's cost and give best
solution. we do not just sell products, we
sell a way to make profit and solve problems.
Gun
Drilled dies:
 Gun-drilled
die is one-part die, there is no parting
lines. We can supply not only round
gun-drilled dies, but also oval dies, flat
beam dies, square/rectangular dies, etc.
Compressing moulds:
| Why Gun-drilled Die? |
1.Good
surface finish: No
half-line left on the rods/tubes
surface.
2.Easy to clean and
set: It
takes only 1/3-1/5 time to clean and set
gun-drilled dies.
3.Long life-time: Avoid
damage along parting line. Generally, service
time of gun-drilled die is 1.5-2.5
times that of parting die.
4.Avoid pultrusion
failure: Parting die is more
likely to cause pultrusion failure due
to die error, un-proper die setting, accumulating
of resin pieces along parting lines, etc.
5.More precise profiles: In
pultrusion of small rods, errors in die
manufacture and setting may cause large
fluctuation in rod diameters. Gun-dies
decrease errors greatly.
|
Preforming system:
Besides formulation and heating control,
preforming system is also criticle for successful
and constancy pultrusion. Before entering
die, impregnated fiberglass rovings and mats
must be properly arranged and placed. un-proper
preforming system causes failure of pultrusion,
bad quality, and other problems.
Please note, preforming
system is far from easy as most people
think of. Firstly, it must be designed
based on profile design to meet the physical
requirements. Secondly, it must let all
reforcements running freely and smoothly, to
avoid any breaking of rovings, mats or
cloth. Thirdly, for dies with mandrels,
the preforming system is the only device
to keep uniform thickness of pultruded
profiles. Im-proper preforming may cause
eccetric and even breaking of pultrusion.
Fourthly, for complex profiles, preforming
system is a large challenge.
UNICOMPOSITE design and manufacture successful
preforming system for every die. we always
try every new die and its preforming system
out to make sure they are perfect.
Need technical/design help or more information?
Please do NOT hesitate to contact our technical
department.
|
